User:Az990tony/edublog-beta-hw: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
No edit summary
Line 21: Line 21:
* One extra power-plug cable (converts white EIDE to black SATA power connector)
* One extra power-plug cable (converts white EIDE to black SATA power connector)
* One extra 18-inch red SATA cable
* One extra 18-inch red SATA cable

<table>
<tr><td>
[[ Image:Az990tony_IMG_4704.png | "computer parts" ]]</td>
<td>Here are the parts purchased. I had purchased two extra red SATA cables,
but then learned that one was already included with the Barebones PC. Also,
had to go back to the store for an extra EIDE-to-SATA (white to black) power
cable adapter.
<p>
The screwdriver is #2 is all that you need for tools.
</td></tr><table>

Revision as of 16:31, 14 June 2008

The following system was built from parts purchased at [SWS Electronics and Computers ] a local computer parts store in Tucson, Arizona (USA).

  • V3-M2A690G barebones PC
    • tower case
    • power supply
      • includes one black SATA power connection cable
    • M2A-VM motherboard
      • SB600 RAID controller
      • ATI Radeon 1200 Graphics
      • 8 USB ports
      • Multi-card reader SD/MMC/MiniSD/Compact Flash
      • One built-in NIC (1GbE)
      • includes one 18-inch red SATA connection cable
  • AMD Athlon64 X2 dual-core 2.3 Ghz processor with heatsink/fan
    • The AMD single-core Sempron might have also met the CPU requirement
  • Two extra NIC cards (PCI)
  • One DVD-RW drive, attached on primary IDE-Master
  • Two SATA drives, 160GB each.
  • One 2GB DIMM
  • One extra power-plug cable (converts white EIDE to black SATA power connector)
  • One extra 18-inch red SATA cable
"computer parts" Here are the parts purchased. I had purchased two extra red SATA cables,

but then learned that one was already included with the Barebones PC. Also, had to go back to the store for an extra EIDE-to-SATA (white to black) power cable adapter.

The screwdriver is #2 is all that you need for tools.