MoBo I/O: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 1: | Line 1: | ||
Many [re]purposes and debug efforts could aided by a comprehensive description of the various low level protocols available on the XO motherboard. |
|||
There are a variety of headless and headed connectors visible on the XO. The following is an attempt to identify them completely. |
|||
= Connectors = |
|||
== Headerless == |
|||
** CN1 - front side of motherboard, right of MIC jack |
|||
** CN19 - above RAM & "3.3V" label |
|||
** [[Serial_adapters#Console/Serial connector -J1|CN24 - top left of backup battery]] |
|||
** CN31 - top right of backup battery |
|||
** CN34 - below MIC header |
|||
== Headed == |
|||
=== Back === |
|||
** [[Serial_adapters#Console/Serial connector -J1|J1 - top left of southbridge]] (3.3v serial port to talk to CPU) |
|||
** CN21 - bottom right of CN22 |
|||
*** PWR in from battery |
|||
** CN22 - bottom left of backup battery |
|||
*** 1-wire(microlan) interface for battery |
|||
** CN23 - right of SD slot |
|||
*** Keyboard connector - LV PS/2 |
|||
*** [[Image:KB3700-ds-01.pdf]] |
|||
** CN26+CN25 - below left and right bottom USB port, respectively |
|||
*** Speaker headers |
|||
=== Front === |
|||
** CN28 - right of MIC jack |
|||
*** backlight FFC slot |
|||
** CN15 - right of MIC-jack side USB plug |
|||
*** MIC header |
|||
** CON4 - bottom of USB plugs on L side of mobo |
|||
*** Camera FFC slot |
|||
** CN27 - top of motherboard |
|||
*** Screen pinout |
|||
== Protocols == |
|||
The XO motherboard also features several standard high and low level protocols. |
|||
* I2C |
|||
** Theoretically used for the DCON - A datasheet should be obtained for the Himax HX8837 chip and the I2C pins/traces should be identified. |
|||
** /dev/i2c-0 |
|||
* 3.3v TTL Serial |
|||
** Easily accessible using a [http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2008 3.3v level converter] and a [http://www.usdigital.com/products/cables-connectors/cables/4-pin/ca-mic4-sh-nc/ proper cable]. |
|||
** /dev/ttyS0 |
|||
= Wanted = |
|||
* Datasheets for all major chips on the XO |
|||
* Python, C, or SH code to control the VGA GPIO |
|||
* The location + code for any and all other GPIOs |
|||
* Positive identification of all aforementioned headers / solder pads / FFC slots |
|||
* Positive pinouts for all aforementioned headers / solder pads / FFC slots |
|||
* Pinout for non-standard VGA connector |
|||
[[Category:Hardware]] |
Latest revision as of 23:28, 29 July 2008
Many [re]purposes and debug efforts could aided by a comprehensive description of the various low level protocols available on the XO motherboard. There are a variety of headless and headed connectors visible on the XO. The following is an attempt to identify them completely.
Connectors
Headerless
- CN1 - front side of motherboard, right of MIC jack
- CN19 - above RAM & "3.3V" label
- CN24 - top left of backup battery
- CN31 - top right of backup battery
- CN34 - below MIC header
Headed
Back
- J1 - top left of southbridge (3.3v serial port to talk to CPU)
- CN21 - bottom right of CN22
- PWR in from battery
- CN22 - bottom left of backup battery
- 1-wire(microlan) interface for battery
- CN23 - right of SD slot
- Keyboard connector - LV PS/2
- File:KB3700-ds-01.pdf
- CN26+CN25 - below left and right bottom USB port, respectively
- Speaker headers
Front
- CN28 - right of MIC jack
- backlight FFC slot
- CN15 - right of MIC-jack side USB plug
- MIC header
- CON4 - bottom of USB plugs on L side of mobo
- Camera FFC slot
- CN27 - top of motherboard
- Screen pinout
- CN28 - right of MIC jack
Protocols
The XO motherboard also features several standard high and low level protocols.
- I2C
- Theoretically used for the DCON - A datasheet should be obtained for the Himax HX8837 chip and the I2C pins/traces should be identified.
- /dev/i2c-0
- 3.3v TTL Serial
- Easily accessible using a 3.3v level converter and a proper cable.
- /dev/ttyS0
Wanted
- Datasheets for all major chips on the XO
- Python, C, or SH code to control the VGA GPIO
- The location + code for any and all other GPIOs
- Positive identification of all aforementioned headers / solder pads / FFC slots
- Positive pinouts for all aforementioned headers / solder pads / FFC slots
- Pinout for non-standard VGA connector