Active Antenna/lang-es

From OLPC
< Active Antenna
Revision as of 03:36, 28 September 2008 by RafaelOrtiz (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  Traducción de Active_Antenna original  
  english | español   +/- cambios  
Ahora, edita tu traducción, usando lo siguiente como guía:
[[Original page]] [[Original page/lang-es]]
(nombre de la página traducida)
Borrando el texto traducido...
(no muy recomendado)
{{OLPC}}
{{Translations}}


== Some header ==


Some text blah... 
blah... [[#Another header]]
... blah == Another header == Some other text blah...
blah... [[Another page]]
and [[Another page#section|section]]
... blah
{{OLPC}}
{{Translation
 | lang = xx
 | source = Original page
 | version = yyyy}}
{{Ongoing Translation}}

{{anchor|Some header}}
== Un titular ==

Algo de texto bla... 
bla... [[#Another header|Otro titular]]
... blah {{ Translated text | Some text blah...
blah... [[#Another header]]
... blah | display = block}} {{anchor|Another header}} == Otro titular == Algo más de texto bla...
bla... [[Another page/lang-xx|Otra página]]
y [[Another page/lang-xx#section|sección]]
... bla {{ Translated text | Some other text blah...
blah... [[Another page]]
and [[Another page#section|section]]
... blah | display = block}}
{{OLPC}}
{{Translation
 | lang = xx
 | source = Original page
 | version = yyyy}}

{{anchor|Some header}}
== Un titular ==

Algo de texto bla... 
bla... [[#Another header|Otro titular]]
... blah {{anchor|Another header}} == Otro titular == Algo más de texto bla...
bla... [[Another page/lang-xx|Otra página]]
y [[Another page/lang-xx#section|sección]]
... bla

Páginas de soporte: si hay un enlace rojo como el siguiente:

[[Original page/translations]]
[[Original page|english]]
[[Original page/lang-es|Página original]]

... debes seguirlo y pegar "{{subst:requesttranslation}}" allí:

[[Another page/lang-es]] [[Another page]]
{{subst:requesttranslation}}
Eso se sustituye con el template:
''{{Translation|lang=es|source=Another page|status=deseada}}
some untranslated page...
maybe the content is mutating rapidly,
or is peripheric to the main corpus, etc.


Esta pagina es acerca de la Antena activa, que es la standalone de la wireless mesh network interface del laptop XO.

Descripcion

The Active Antenna is a standalone version of the wireless mesh network interface used in the XO laptop. It connects to a host or power source through a 5m (16ft) USB cable. As a mesh networking interface, it both serves as network interface for any host connected through USB and as a repeater node in the mesh. Two or three Active Antenna are used with each School server, one may be connected to an XO or other laptop to allow mesh networking, or they may simply be connected to a wall brick providing power.

A similar device is the Solar Repeater, where an Active Antenna is integrated with a solar cell and battery unit.

This unit requires around 200mA at +5V for normal operation. If connected to a USB host (and not just a power supply), it requires a specialized driver which uploads firmware and manages the mesh functionality. This driver is available for Linux (libertas) and Windows.

Obteniendo una

If you have a need for one or more Active Antenna for a project that OLPC might be interested in supporting, please apply through the developers program. Currently, our supply is very limited, but we hope to have enough to provide them to qualified developers.

Versiones

There are different versions of Active Antenna, with different availability dates: Production, Pre-Build, and Prototype.

Produccion

The Active Antenna production units should be available in the first quarter of 2008.

Pre-Build

A version of the Active Antenna will be built using the production electronics and a temporary packaging solution, while the molds for the final package are completed and tested. This pre-build antenna should perform identical to the production model (e.g. the reset problem has been fixed), but will not be quite as nice to look at. These units will not have any regulatory approval, and are solely for test use.

AApre-build.jpg

The picture shows Michail Bletsas, OLPC's chief connectivity officer, holding a pre-build Active Antenna.

We should have pre-build units available by the end of February, 2008.

Prototipo

An early Active Antenna prototype was built using engineering samples provided by Marvell. These early prototypes suffered from a problem where they did not reset consistently, but allowed School Server development and trial usage to occur.

AAprototype.jpg

About a hundred and twenty of these have been made. They do not have any regulatory approvals, and are solely for testing purposes.

Reprogramando

Most of the early Active Antenna prototypes suffered from a problem where they entered stand-alone repeater mode too quickly, preventing their proper operation when plugged into a server on boot. This can be corrected by reprogramming them.

Detalles

This is a closeup of the USB connection to the Marvell engineering module:

AAprototypeCloseup.jpg

Note the components D1 and D2 on the lower edge. These are diagnostic LEDs controlled by GPIO lines on the controller. The LEDs are not visible outside the case. The default LED configuration may not be optimal. To set them to display in the same way as the XO, use this command:

iwpriv eth7 ledgpio 1 1 2 0

To turn them off to minimise power usage, use this command:

iwpriv eth7 ledgpio 1 16 2 16

Vea Tambien