OLPC Firmware Q2A53: Difference between revisions

From OLPC
Jump to navigation Jump to search
m (categorization)
m (Reverted edits by 194.176.176.82 (Talk) to last version by Xavi)
 
(One intermediate revision by one other user not shown)
(No difference)

Latest revision as of 05:56, 17 December 2008

  This page is monitored by the OLPC team.

OLPC Firmware Production Release Q2A53 - 2006-12-1

This is the update release for the B-test build.

File:Olpc-Q2A53.rom

MD5 a1af762465a6b2a0a8939d51d6e31f9e olpc-Q2A53.rom

Changes since Q2A42

  • EC update to A51
  • OFW: Some nand write fixes for spurious errrors
  • OFW: Flash preserves mfg data
  • OFW: Sets keyboard type in CMOS RAM based on manufacturing data
  • OFW: Network is enabled - works with Ax88772 and Ax8817x USB ethernet chips
  • OFW: Boot process polish - color icons, speedups, function key handling, less screen flashing
  • OFW: USB STALL fixes - some USB devices (e.g. keyboards) that used to fail now work
  • OFW: Serial and kbd/screen console now work simultaneously
  • OFW Compilation process: Fixes to make gunzip work with gcc 4
  • OFW Compilation process: Built from open source svn upstream instead of from tarball

Installation Caveats

  • After you reflash, you must power cycle by physically removing power from the system. A warm-start or button-induced restart is not sufficient. Please remove both the battery pack and wall adapter for 10 seconds.

ATest users only: If you use olpcflash to write this image, you must use the --brick option.
Example: olpcflash --brick -w image.rom
This will update your EC code.

BTest-1 users should NOT use olpcflash to write new firmware images. Doing so will erase the manufacturing data that was added at the factory.

Known issues

  • Auto-repeat is slow on some USB keyboards
  • NVRAM storage for configuration variables is not yet implemented.
  • JFFS2 does not pay attention to the bad block table.
  • JFFS2 does not handle ECC
  • The boot menu is incomplete
  • Dirctory symlinks have a problem.

ATest -- Infineon RAMs only

Thise is a special purpose image. Do not use except on A-test boards with Infineon RAMS.

For more info see Upgrading_to_LinuxBIOS#Checking_your_DRAM_type

File:Olpc-Q2A53 CL2.5.rom

MD5: 2331a33116b65bd885c1efcfdf02a6e7 olpc-Q2A53_CL2.5.rom