Turtle Art

?Sugar icon}}

This activity is now hosted at the Sugar Activity Library. The information here is likely to be out-of-date. Consult the new pages for "Turtle Art" first: download page home page source code page

english | español

HowTo [ID# 234587]  +/-

Turtle Art This activity was bundled Tickets all - active - new Pootle — POT Brian Silverman, Walter Bender

Turtle Art is an activity with a Logo-inspired graphical "turtle" that draws colorful art based on Scratch-like snap-together visual programming elements.

Turtle Art is intended to be a stepping stone to Logo, but there are many restrictions compared to Logo. (Only numeric global variables and stack items are available, no lists or other data-structures. The conditionals and some of the functions only take constants or variables, not expressions. Limited screen real-estate makes building large programs unfeasible.) However, you can export your Turtle Art creations to Berkeley Logo. Turtle Art also has a (limited) facility for sensor input, so, for example, you can move the Turtle based upon sound volume or pitch.

Turtle Art was written by Brian Silverman and is maintained by Walter Bender. Arjun Sarwal added the sensor features.

To download a tutorial intended for children about Turtle Art, go to the Turtle Art student guide!. Also, see the Turtle Art FLOSS Manual].

Note: The first time you run Turtle Art, it takes about 30 seconds to load. You'll see a mostly blank screen after the initial flashing of the icon. Subsequently, the loading time is ~5 seconds (on an OLPC-XO-1 laptop).

Palettes

There are six palettes of program elements available for program construction. You add blocks to your program by clicking on or dragging them from the palette to the main area. You can delete a block by dragging it back onto the palette. Click anywhere on an existing "stack" of blocks to start executing that stack.

Turtle (green)

• Clean – clear the screen and reset the turtle to center, pointed up (pen down, bright red)
• Forward(number) – move turtle forward
• Back(number) – move turtle backward
• Left(angle in degrees) – turn turtle counterclockwise
• Right(angle in degrees) – turn turtle clockwise
• Arc(angle in degrees,radius) – move turtle along an arc
• SetYX(xcor,ycor) – move turtle to position (xcor,ycor) [(0,0) is in the center of the screen.]
• SetH(heading) – set the heading of the turtle [0 is towards the top of the screen.]

Turtle state values (can plug into a parameter)

• • X, Y, heading (Zeros for each are center screen, pointed up. Heading is degrees clockwise.)
  • angles are degrees from 0 to 360 (for larger values and smaller values all multiples of 360 are subtracted or added to get the value into the range 0..360).
  • Example: 90 means a right angle clockwise, –30 means a 30 degree angle counterclockwise

Pen (cyan)

• Pen Up – turtle will not draw when moved
• Pen Down – turtle will draw when moved
• Set Pen Size(number) – set size of the line drawn by the turtle
• Set Color(number) – set color of the line drawn by the turtle
• Set Shade(number) – set shade of the line drawn by the turtle
• Fill Screen(color,shade) – fills the background with (color, shade)
• Pen state values (can plug into a parameter)
  • Pen size, color, shade
  • Colors and shades are represented by a number from 0 through 99. Using a number outside of this range is allowed, and will cause the value to be "wrapped around" (via a modulo, or "clock arithmetic" operation) to the 0 – 99 range. Color specifies a hue and shade specifies an admixture of white or black to the color.

This image shows the correspondence between the color's representative number and the actual color itself. NOTE: Some of these colors will appear differently on the XO screen than they do on a standard computer screen. This image is taken from a screenshot on a Macintosh Mini using Firefox to view this webpage.

Here is a photograph of the Browser Activity on the XO displaying the original website for the preceding image. It should be taken with a large grain of salt, since it is a photo of a laptop screen, and is thus a pretty poor way to reliably show colors. To see the colors available in Turtle Art, the original website should be viewed on an actual XO.

Numbers (violet)

• Values (can plug into a parameter)
  • Number (constant)
  • Infix operators(left,right)
    • +, –, *, /, mod
  • Random(min, max) (constants or boxes only)
• Conditions (oval, plugs into an If Block)
  • <, >, = (takes two constants or boxes)
  • and, or, not (takes other conditions)
• Print(number) - Debugging output. When in full-screen mode (Alt-Enter), show a numeric value at the bottom of the screen.

Sensors (red)

• volume
• pitch
• voltage – (As read from mic in on the OLPC-XO-1 laptop)
• resistance – (As read from the mic in on the OLPC-XO-1 laptop)

More details on how to use the sensors can be found on the Measure Activity page.

Flow (orange)

• Wait(number) – wait specified number of seconds
• Forever[stack] – (no continuation)
• Repeat(number)[stack] – loop specified number of times
• If(condition)[then] – uses boolean operators from Numbers palette
• If(condition)[then][else] – uses boolean operators from Numbers palette
• Stop (no continuation)
• Connectors:
  • jog right
  • jog down

My blocks (yellow)

• Stack1,2 – a rhombus which tops a stack, equivalent to a procedure definition (but without parameters).
• "Stack1,2" – blocks for invoking a stack (no parameters)
• Store in "box" 1,2(n) – blocks for setting a variable
• "Box1,2" (plugs into a parameter)

• • A glaring limitation: you cannot rename these objects. Thus, you are limited to two procedures and two global variables! Madness! --IanOsgood 13:59, 30 December 2007 (EST)

As of TurtleArt-27 there are named boxes and stacks. --Walter 00:37, 6 January 2009 (UTC)

As of TurtleArt-28 there is a FILO heap (i.e. parameter stack) along with push and pop blocks. --Walter 18:15, 7 January 2009 (UTC)

Program control icons

There are also some icons at the top right for user control:

• Show/Hide the current program
• Eraser – clear the screen and reset the turtle (same as the Clean block)
• Stop (for infinite loops)
• Run your program (rabbit icon) – the stack without a "hat" is run at full speed
• Step through your program (turtle icon) – the stack without a "hat" is run with a pause between each step

Project tab

The Project tab (at the top left of the toolbar) has a button to access sample programs shipped with the Activity. It also has a export button to save the project into the Journal as a Berkeley Logo session (logosession.lg),

Turtle Art with Sensors

There is a hack combining some of Measure with Turtle Art. See Turtle Art with Sensors for the activity version, and the related Sensor input section of the measure page for details about how this was accomplished.

See also

• Etoys project TurtleGeometry
• Python projects PyoLogo and PyLogo
• Tutorial de TortugArte Spanish

Gallery

• 

  Turtle Art startup screen

• 

  Clicking on the Blocks menu brings the basic tool set into view

• 

  Drag blocks from the menu

• 

  Click on the top block of a stack to execute the stack

• 

  Other blocks can be found under the tabs

• 
• 

  Example projects are found on the Projects menu on the upper right of the screen

• 
• 

  A recursive algorithm (difficult without parameters)

• 

  Simple fractal recursion example

• 

  Sierpinski Triangle recursion example

• 

  A screen dump of Turtle Art displaying all of the colors and shades that are available within Turtle Art.

• 

  The algorithm created by "catmoran" for displaying all of the colors and shades in Turtle Art.

This article is a stub. You can help the OLPC project by expanding it.

Activity Summary

Icon:	Sugar icon::Image:Turtleart.png
Genre:	Activity genre::Programming
Activity group:	,|x|Activity group::x}}
Short description:	Short description::Turtle Art is an activity with a Logo-inspired graphical "turtle" that draws colorful art based on snap-together visual programming elements.
Description:
Maintainers:	,|x|Contact person::x}}
Repository URL:
Available languages:	,|x|Available languages::x}}
Available languages (codes):	,|x|Language code::x}}
Pootle URL:
Related projects:	Related projects,|x|Related projects::x}}
Contributors:	,|x|Team member::x}}
URL from which to download the latest .xo bundle	Activity bundle::
Last tested version number:
The releases with which this version of the activity has been tested.	,|x|Software release::x}}
Development status:
Ready for testing (development has progressed to the point where testers should try it out):	,|x|Ready for testing::x}}
smoke tested :
test plan available :
test plan executed :
developer response to testing :