XO 1.75 A1: Difference between revisions
(Created page with '{{OLPC}} XO-1.75 Laptop Alpha test model, also known as A-test or A1. == Description == The A1 are the first prototypes of the [[Hardware#XO_1.75|XO…') |
|||
| Line 35: | Line 35: | ||
* [[Media:XO_1.75_Connectors_A1.pdf|Connector Locations]] |
* [[Media:XO_1.75_Connectors_A1.pdf|Connector Locations]] |
||
* [[Media:XO_1.75_GPIOs_A1.pdf|GPIO Mappings]] |
* [[Media:XO_1.75_GPIOs_A1.pdf|GPIO Mappings]] |
||
* [[Media:XO_1. |
* [[Media:XO_1.75_EC_Pinout_v5.pdf|EC Pinout]] |
||
'''Please note that production boards will likely have different pin mappings and connector locations.''' |
'''Please note that production boards will likely have different pin mappings and connector locations.''' |
||
Revision as of 19:08, 13 October 2010
XO-1.75 Laptop Alpha test model, also known as A-test or A1.
Description
The A1 are the first prototypes of the XO-1.75 built. The A1 bring up is happening in late Oct., 2010.
The number of boards obtained will be small, and distribution will be limited to hardware testing and OFW and Linux kernel driver development.
Identification
- Bare circuit board, no case or display
Photographs:
Software Support
XO-1.75 use Q4xxx firmware releases. These will not work on an XO-1 or XO-1.5. For the first time, Open Firmware is provided as part of the Linux image, and the EC firmware is separate.
A Linux image for the A1 is available at ?.
To install on an XO-1.5, you can run:
zcat os175.img.gz > /dev/hda
Restrictions
Functional testing of the A1 prototypes will be ongoing.
Documentation
Supporting documentation for these boards (all in PDF):
Please note that production boards will likely have different pin mappings and connector locations.