Olpc-update: Difference between revisions

From OLPC
Jump to navigation Jump to search
(→‎Prepare a USB flash drive: detail what's required)
m (tweak grammar of summary sentence)
 
(50 intermediate revisions by 23 users not shown)
Line 1: Line 1:
<noinclude>{{OLPC}}{{Translations}}
{{Translations}}
{{TOCright}}
{{TOCright}}


[[olpc-update]] is a command-line program to update your system software.
[[olpc-update]] is a command-line program to update your system software. It preserves your [[Journal|files (journal)]] and [[activities]] you have installed.
It only copies the differences between your current version and a new [[OS images|OS image]], preserving your [[Journal|files (journal)]] and [[activities]] you have installed.
It can access the new version from the internet, or from files you place on a USB drive.


See [[Upgrading the XO]] for other update scenarios.
olpc-update can download the new version from the internet, or from a file on a [[USB drive]]. See [[Updating the XO]] for other update scenarios.


The old software version is erased the first time the new version is booted, but this can be prevented.
==Before you begin==
<font color=red>You must be using a B3 machine or better, and build 650 or better of the system software.</font> All G1G1 recipients have received C2 (also known as MP) hardware running build 650 or higher.


(Certain really old builds, like 656, can't olpc-update to recent builds. Check the release notes of a recent build to find out if olpc-update can be used from a really old build. If not, then you must install the recent build afresh.)
If you have problems, you can try booting a previous configuration before attemping an update; see [[#Restoring a previous OS image]].

If you want to wipe out your journal and all content you've generated and restore your machine to a pristine state, please use the [[Clean-install procedure]]. That works even if you've got an older machine or older build.


== What version do I have now? ==
== What version do I have now? ==
Line 19: Line 14:
To tell what version of the system software you have, follow [[How to check the OS and firmware versions]].
To tell what version of the system software you have, follow [[How to check the OS and firmware versions]].


== What version is available? ==
== Disk space requirements ==
You need to identify the "build" to which you want to update your system.
The latest stable system software release is
: {{Latest_Releases/stable}}
Most users should update to that build.


Due to its fail-safe design, olpc-update must store all of the changed files in the release that you are updating to, alongside the existing release that you are running, for a short time. olpc-update cannot complete if there is not enough disk space available.
All releases currently available are listed on the [[Release notes]] page.
Before upgrading to any release, read its [[release notes]] carefully.


If upgrading between minor releases within the same release series or between development releases in the same development stream, the space required will be low. However, if upgrading from one major release to another (e.g. [[10.1.3]] to [[11.2.0]]), you will probably need more than 300mb of disk space available (even though the upgrade process will finish with approximately the same amount of disk space available).
===Other builds===
{{Latest Releases | rc = inline | devel = inline}}
There are later builds in various stages of development, see [[OS images]] for more background.
These are likely to be unstable and you will probably need to request a [[developer key]] to install them.


== How to upgrade ==
To the right is a list of our latest releases. <font color="red">If you have a developer key for your machine</font>, and feel adventurous, you can try the candidate or a developer build. For the latest developer build, click on the 'jffs2' link beside 'devel' in the box, and use the name at the top of the page; it will be something like "joyride-2452".

See the [[Releases]] page for the releases that are available. The release notes for each recent release will explain exactly how to use olpc-update to update to that particular version. Be sure to read the release notes before starting the update.

The instructions below are generic.


== Performing an update ==
=== Simple online update ===
=== Simple online update ===
Note: You should always back up important files; e.g., to a USB drive or to a school server before updating, just in case.
</noinclude><includeonly>:''Main article: [[olpc-update]]''<p></includeonly>'''olpc-update''' is designed to work with even the worst internet connections, and will do no harm if it is interrupted during download. If you don't like your new software update, you can revert to the older version by holding down the '''O''' key on the game pad (between the right speaker and the power button) when you next turn the laptop on.

</noinclude><includeonly>:''Main article: [[olpc-update]]''<p></includeonly>'''olpc-update''' is designed to work with even the worst internet connections, and will do no harm if it is interrupted during download. It will resume from where it left off, without having to download what it has already downloaded.


To manually upgrade your machine when a new version is released:
To manually upgrade your machine when a new version is released:
Line 45: Line 37:
# Start the '''[[Terminal Activity]]''' [[Image:Activity-terminal.svg|35px]] (or if you cannot do so, open a [[console]]) and type the following (press the Enter key after it):
# Start the '''[[Terminal Activity]]''' [[Image:Activity-terminal.svg|35px]] (or if you cannot do so, open a [[console]]) and type the following (press the Enter key after it):


sudo olpc-update ''build-number'' <!-- reboot, verbose -->
sudo olpc-update ''build-identifier''


The ''build-identifier'' is normally identified on the [[Releases|release notes]] of the release you are upgrading to. Historically, build identifiers were simple numbers (e.g. 802), for newer builds prefixes are used to separate between the different laptop models (e.g. 10.1.3_xo1.5-860).
For example:
sudo olpc-update 711


If you get an error saying "command not found", type "su -", press enter and then "olpc-update ''build-identifier''" and press enter. For example:
Where
* <tt>build-number</tt> is the number of the build to be updated to. Released versions are simple numbers; development versions are prefixed numbers like 'joyride-2310' or '8.2-765'. The latest stable build is {{Latest_Releases/stable}}.

If you get "sudo: command not found" errors, type "su -", press enter and then "olpc-update ''build-number''" and press enter. For example:
su -
su -
olpc-update 711
/usr/sbin/olpc-update 802


If olpc-update successfully connects to the update server, some messages should display
If olpc-update successfully connects to the update server, some messages should display


Downloading contents of build ''build-number''
Downloading contents of build ''build-identifier''
Updating to version hash ''xxxx''
Updating to version hash ''xxxx''
Making clean /versions/updates/...
Making clean /versions/updates/...
Line 78: Line 66:
When the XO restarts the update will be complete.
When the XO restarts the update will be complete.


After updating, you should run the Sugar activity updater from the control panel. If not, you may find that various activities are not working.
If you want to revert to the previous build, see [[olpc-update#Restoring a previous OS image|Restoring a previous OS image]].


===Simple offline update===
Note
* When upgrading from build number 656 to 703, the upgrade may fail due to transient rsync errors, for example "rsync error: error in rsync protocol data stream (code 12) at io.c(824) [receive r=2.6.9]" and "rsync error: some files could not be transferred (code 23) at main.c(1385) [receiver=2.6.9]". In that case, retrying the command often allows the upgrade to complete successfully.
* When upgrading from build 650, 653, or 656, you '''must install activities separately'''. See [[OLPC Update.1 Software Release Notes|Update.1 Software Release Notes]] for details. In 8.2-series builds (765 and higher), the software update control panel will allow you to update your activities after you upgrade.


Unless you are running a very old release, you can also download the new release data onto a USB disk from an internet-connected computer, and then use olpc-update on an XO to perform the update, without requiring any internet connection.
<noinclude>


===Simple offline upgrade===
==== Prepare a USB drive ====


Your USB drive needs to be writable from the computer on which you'll download the files, and readable from a running XO (as <tt>/media/''YourDriveName</tt>).
You copy special files for the new build to a USB flash drive, and then tell olpc-update to update the system image from USB.

==== Prepare a USB flash drive ====
<!-- Similar information should go in all USB update files;
I think olpc-update's requirements are less stringent since a running XO reads it instead of the boot firmware reading it.
-->
Your USB flash drive needs to be writable from the computer on which you'll download the files, and readable from a running XO (as <tt>/media/''YourDriveName</tt>).
That probably means your USB flash drive should be formatted as FAT or FAT32, and only contains one partition.
Most ordinary USB flash drives are set up this way, except "U3" flash drives which may not work.
Remove U3 with uninstall software from http://www.u3.com/uninstall


*(Note that ''/media'' changes to ''/run/media/olpc'' for Fedora 17 based builds used in 12.1.0 and later).
==== Download .usb and .toc files onto USB ====
==== Download .usb and .toc files onto USB ====
Insert a USB flash drive into a computer connected to the Internet.
Insert a USB drive into a computer connected to the Internet.


Follow one of the build links in the "latest releases" box above. You need to download two files to the top directory of your USB flash drive: '''<code>os''NNN''.usb</code>''' and '''<code>os''NNN''.toc</code>''', where ''NNN'' is the numeric part of the build you are updating to. For example, if you are updating to build 711, the files would be named <code>os711.usb</code> and <code>os711.toc</code>; if you are updating to build joyride-1452, the files would be named <code>os1452.usb</code> and <code>os1452.toc</code>.
Go to the download.laptop.org site to fetch the [http://download.laptop.org/xo-1/os/official/ latest XO-1 release] or the [http://download.laptop.org/xo-1.5/os/official/ latest XO-1.5 release]. You need to download two files from the build's directory to the top directory of your USB drive: '''<code>os''NNN''.usb</code>''' and '''<code>os''NNN''.toc</code>''', where ''NNN'' is the numeric part of the build you are updating to. For example, if you are updating to build 711, the files would be named <code>os711.usb</code> and <code>os711.toc</code>; if you are updating to build joyride-1452, the files would be named <code>os1452.usb</code> and <code>os1452.toc</code>.
Right-click (Ctrl-click for Mac) on each of the two names and choose "Save Target As" ("Save Link As" for Firefox). Save both files to the USB drive. Do not open the files.


==== USB upgrade ====
==== USB update ====


# Plug the XO into an electrical outlet
# Plug the XO into an electrical outlet
# Insert your USB flash drive with the <tt>.toc</tt> and <tt>.usb</tt> files on it into your XO.
# Insert your USB drive with the <tt>.toc</tt> and <tt>.usb</tt> files on it into your XO.
# Start the [[Terminal activity]] (or if you cannot do so, open the [[console]]), and enter:
# Start the [[Terminal activity]] (or if you cannot do so, open the [[console]]), and enter:
/usr/sbin/olpc-update --version
sudo /usr/sbin/olpc-update --usb


If you get "command not found" errors, enter:
The first line of the response should be something like:
olpc-update 2.12, Copyright (C) 2007 One Laptop Per Child Association, Inc.

If you don't even have the --version option, <font color="red">(this includes all G1G1 laptops shipped before July 2008)</font> or if it does not say that you are using at least version 2.0 of olpc-update, you will need to [[#Updating olpc-update|update olpc-update]] before continuing.

At the terminal prompt, type:
sudo olpc-update --usb
and press enter.

If you get "sudo: command not found" errors, enter
su -
su -
olpc-update --usb
/usr/sbin/olpc-update --usb


When olpc-update is finished, [[reboot]] to start using your new build.
When olpc-update is finished, [[reboot]] to start using your new build.


== Retention of previous versions ==
As with other update sources, the update mechanism preserves the build from which you ran the updater as an "alternate" image from which you can boot, see [[#Restoring a previous OS image]].


As of release [[11.2.0]], olpc-update only keeps 1 software version available by default (i.e. the old version is deleted after booting into the new version for the first time).
== Restoring a previous OS image ==
The update mechanism preserves the build from which you ran the updater as an "alternate" image from which you can boot.
This means you can restore to a previous version of your OS if, after your update, your image isn't working properly.


Older releases maintained two versions ("primary" and "alternate"), so that you could switch between the two (accepting any strange side effects caused by a software downgrade, not really supported by OLPC or the software that it ships).
To swap the "primary" and "alternate" images:
* shutdown the XO
* power-on ''while holding down the'' ' '''O''' ' ''gamepad key''.
* release the key when you're instructed to do so
* [[How_to_check_the_OS_and_firmware_versions|check the OS version]]


== Avoiding purge of previous versions ==
== More information ==
The olpc-update script works by transferring only the differences between builds from a USB flash drive or across the internet link from an updates server. This makes updating easier, mostly quicker, and almost always with less data transfer.


You can avoid olpc-update from deleting old versions in any situation by marking them as sticky, e.g. for build 802:
As an example of the data efficiency gain,
*A full reinstallation from OS build 602 to 603 would normally take about 279Mb of download data, whereas ''olpc-update'' takes 16Mb of download data,
*A full reinstallation from OS build 603 to 608 would normally take 262Mb of download data, whereas ''olpc-update'' takes 6.5Mb of download data,
*An ''olpc-update'' from OS build 602 to 625 takes 33Mb of download data.


touch /versions/sticky/802
The time efficiency gain is less easy to characterize. It depends on the speed of the internet link, the speed of the updates server, and whether the update was able to use its server-friendly efficiency mode. An ''olpc-update'' from 602 to 603 took under 17 minutes.


== Restoring a previous OS ==
The current updates server is updates.laptop.org.


If you are using an old release where 2 versions are maintained, or if you are running a modern release and have requested olpc-update to not purge one of the versions, you can switch between the 2 versions as follows:
=== Root access ===
To actually update your XO, you must run the olpc-update command as the [[root]] user
(you can check its version and get usage help without being root).


# shutdown the XO
Entering <tt>sudo olpc-update ''options''</tt> is the preferred way to run it as the root user.
# power-on ''while holding down the'' ' '''O''' ' ''gamepad key''.
However, sudo is not available in some builds, and in sudo does not work in some builds which require a password until you become "[[root]]".
# release the key when you're instructed to do so
Here are some ways to become the root user:
# [[How_to_check_the_OS_and_firmware_versions|check the OS version]]
* In later versions of the [[Terminal Activity]] you can become "root" by pressing the "#_" icon at the top of the terminal screen.
* In builds earlier than 703 you may need to instead enter <tt>[[su -l]]</tt>.
* In the [[console]] you can login as root.


== Purging a previous OS ==
The root prompt ends with <tt>#</tt>. Then you can just enter <tt>olpc-update ''options''</tt>.


If you have marked a version as sticky and now wish to remove it, or if you are running an old release where the old version is maintained and you wish to free up the disk space occupied by it, you can follow the example Terminal session log shown below.
=== Updating olpc-update ===
If you are using an old build, olpc-update might not be recent enough to let you update via USB, or update to a build containing a library. Here's how to upgrade olpc-update to allow you to use the processes described above.


=== Identify what is present ===
From a [[#Root access|root prompt]] on your XO:
# wget -P /tmp/X -r -np -nd http://dev.laptop.org/~cscott/olpc-update/
# rpm -Uvh --force /tmp/X/olpc*.rpm


List the available builds on the system.
Or, if you are working without a internet connection on the XO-1, go to http://dev.laptop.org/~cscott/olpc-update/ and download both files to your USB drive. Then with the USB drive inserted into the XO-1:
# rpm -Uvh --force /media/''your_USB_Drive_Name''/olpc*.rpm


# '''ls /versions/pristine/*/boot/olpc_build'''
Now:
/versions/pristine/802/boot/olpc_build
# olpc-update --version
/versions/pristine/ed3fcf7128610f1f6fe07890f2315742/boot/olpc_build
should tell you that you have version 2.7 or higher of olpc-update.
# '''cat /versions/pristine/*/boot/olpc_build'''
802
851


This shows there are builds 802 and 851 available on the system.
== Usage ==


=== Identify what is running ===
In summary:
# '''cat /boot/olpc_build'''
851


This shows that the build currently running is build 851.
*Be connected to the internet.
Do not purge a build if it is the one running now &mdash; things break badly.
*In a terminal, become root, or type <tt>sudo</tt> before "olpc-update"
*Type <tt>olpc-update ''NNN''</tt> where NNN is the build number or name-number,
*Wait for the update to complete,
*Reboot.


=== Measure free space before purge ===
# '''df /'''
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mtdblock0 1048576 708572 340004 68% /


This shows roughly 340004 KB available.
=== Be Connected ===


=== Purge the unused build ===
Ensure the laptop or the emulator is able to access the internet, by being connected an an access point, or via the mesh, or using an ethernet connection.


# '''rm -rf /versions/pristine/''802'' /versions/contents/''802'' /versions/run/''802'''''
=== Run olpc-update ===


Removes all the files of the unused build. Takes a few seconds.
Normally you only need to run ''olpc-update'' with a build number, like this:


=== Measure free space after purge ===
# olpc-update 703
or
# olpc-update joyride-1779
There are other options. For example:


# '''df /'''
# olpc-update --help
Filesystem 1K-blocks Used Available Use% Mounted on
<pre><nowiki>
/dev/mtdblock0 1048576 495944 552632 48% /
Usage:
olpc-update [options] --hints hints-file
olpc-update [options] --latest stream-name
olpc-update [options] [-rf] build-number
olpc-update [options] [-rf] --usb
olpc-update --version
olpc-update --help


This shows roughly 552632 KB is available, a significant increase.
For example:
olpc-update 630
olpc-update joyride-2200
olpc-update --latest joyride


=== Verify builds present ===
For convenience, 'olpc-update joyride-latest' is treated as an alias for
'olpc-update --latest joyride'.


# '''ls /versions/pristine/*/boot/olpc_build'''
Options:
/versions/pristine/ed3fcf7128610f1f6fe07890f2315742/boot/olpc_build
-h, --help show this help message and exit
# '''cat /versions/pristine/*/boot/olpc_build'''
-f, --full skip incremental update attempt.
851
--force force update to an unsigned build.
-r, --reboot reboot after a successful update.
-p, --poweroff poweroff after a successful update.
--hints=FILE name of json-encoded hints dictionary identifying the desired
new version.
--latest=STREAM update to the version named by the given update stream.
-u, --usb update to new build on inserted USB stick.
-v display verbose progress information; repeat for more verbose
output.
-q, --quiet don't output anything; use exit status to indicate success.
--version display version and license information.
</nowiki></pre>


This shows only the one build is now present.
=== Update Targets ===


There is no need to reboot or restart after purging the alternate build.
There are several update targets available. There is usually one for each operating system build, and there are others for test builds and for Debian. To get a ''partial'' list of the available builds, use the command:


== More information ==
$ rsync rsync://updates.laptop.org | sort
The olpc-update script works by transferring only the differences between builds from a USB drive or across the internet link from an updates server. This makes updating easier, mostly quicker, and almost always with less data transfer.


As an example of the data efficiency gain,
'''Note that this does not list all the builds available.''' Instead, this just lists the builds which have been requested recently; the server loads new builds on demand and garbage collects old builds.
*A full reinstallation from OS build 602 to 603 would normally take about 279Mb of download data, whereas ''olpc-update'' takes 16Mb of download data,
*A full reinstallation from OS build 603 to 608 would normally take 262Mb of download data, whereas ''olpc-update'' takes 6.5Mb of download data,
*An ''olpc-update'' from OS build 602 to 625 takes 33Mb of download data.


The time efficiency gain is less easy to characterize. It depends on the speed of the internet link, the speed of the updates server, and whether the update was able to use its server-friendly efficiency mode. An ''olpc-update'' from 602 to 603 took under 17 minutes.
You can use the --latest option to olpc-update with one of the build streams listed at https://activation.laptop.org/streams/ -- for example:


The current updates server is updates.laptop.org.
$ sudo olpc-update --latest unstable

(But first <trac>7676</trac> needs to be fixed.)

You will need a [[developer key]] to install any of the builds below:

* [[Joyride]]: the latest joyride build number can generally be found at the top of [http://dev.laptop.org/~rwh/announcer/joyride-pkgs.html the build announcer page].
* Debian: [[Installing Debian as an upgrade]] (unmaintained)
* Ubuntu/[[Edubuntu]]: (unmaintained, currently broken: <trac>7012</trac>)


=== Advanced usage ===
=== Advanced usage ===
==== Update Using Another Laptop ====
==== Update using another laptop ====


Q: How can I re-use the bits for multiple laptops, using a laptop?
Q: How can I re-use the bits for multiple laptops, using a laptop?
Line 301: Line 231:




==== Setting Up A Local Updates Server ====
==== Setting up a local updates server ====

'''Q''': How can I re-use the bits for multiple laptops, using a server?

'''A''': This feature is available for testing but is not yet released.


The school server integrates with olpc-update. The [[XS-rsync]] component accepts software images and makes them available to olpc-update clients.
The source code for the updates server is available at:
: http://dev.laptop.org/git/users/cscott/upgrade-server


Basic installation instructions can be found at [[Upgrade Server]].
A dated, alternative solution is described at [[Upgrade Server]].


== For Developers ==
== Source Repository and Specification ==


Original specification: [[XO updater]]
'''Q''': Where are the specifications?


Source:
'''A''': See the [[XO updater]] article.
* git://dev.laptop.org/projects/olpc-update
* http://dev.laptop.org/git/projects/olpc-update
* http://dev.laptop.org/pub/source/olpc-update/


Maintainer: [[User:DanielDrake]]
'''Q''': Where is the source?


olpc-update uses [[olpc-contents]] for most of the heavy lifting.
'''A''': The source repository for olpc-update is
: http://dev.laptop.org/git/users/cscott/olpc-update
It also uses code from the olpc-contents package:
: http://dev.laptop.org/git/users/cscott/olpc-contents


[[category:software]]
[[category:software]]
[[Category:Package management]]
[[Category:Package management]]
[[Category:Update paths]]
[[Category:Update paths]]
</noinclude>

Latest revision as of 23:53, 17 December 2013

  english | español日本語 HowTo [ID# 294072]  +/-  

olpc-update is a command-line program to update your system software. It preserves your files (journal) and activities you have installed.

olpc-update can download the new version from the internet, or from a file on a USB drive. See Updating the XO for other update scenarios.

The old software version is erased the first time the new version is booted, but this can be prevented.

(Certain really old builds, like 656, can't olpc-update to recent builds. Check the release notes of a recent build to find out if olpc-update can be used from a really old build. If not, then you must install the recent build afresh.)

What version do I have now?

To tell what version of the system software you have, follow How to check the OS and firmware versions.

Disk space requirements

Due to its fail-safe design, olpc-update must store all of the changed files in the release that you are updating to, alongside the existing release that you are running, for a short time. olpc-update cannot complete if there is not enough disk space available.

If upgrading between minor releases within the same release series or between development releases in the same development stream, the space required will be low. However, if upgrading from one major release to another (e.g. 10.1.3 to 11.2.0), you will probably need more than 300mb of disk space available (even though the upgrade process will finish with approximately the same amount of disk space available).

How to upgrade

See the Releases page for the releases that are available. The release notes for each recent release will explain exactly how to use olpc-update to update to that particular version. Be sure to read the release notes before starting the update.

The instructions below are generic.

Simple online update

Note: You should always back up important files; e.g., to a USB drive or to a school server before updating, just in case.

olpc-update is designed to work with even the worst internet connections, and will do no harm if it is interrupted during download. It will resume from where it left off, without having to download what it has already downloaded.

To manually upgrade your machine when a new version is released:

  1. Plug the XO into an electrical outlet
  2. Connect to the internet. If you are upgrading because you have a WPA hotspot at home, you might want to go to a Public Hotspot to connect to the internet for an online upgrade, such as a T-Mobile hotspot or a local libary.
    Firewall note: olpc-upgrade requires outgoing TCP PORT:873 to be unfiltered by the hotspot's firewall. In otherwords if the laptop has functional-access to the internet but olpc-upgrade returns the message "I don't think you're connected to the internet." check the hotspot's firewall is not blocking the outgoing TCP Port 873.
  3. Start the Terminal Activity Activity-terminal.svg (or if you cannot do so, open a console) and type the following (press the Enter key after it):
sudo olpc-update build-identifier

The build-identifier is normally identified on the release notes of the release you are upgrading to. Historically, build identifiers were simple numbers (e.g. 802), for newer builds prefixes are used to separate between the different laptop models (e.g. 10.1.3_xo1.5-860).

If you get an error saying "command not found", type "su -", press enter and then "olpc-update build-identifier" and press enter. For example:

su -
/usr/sbin/olpc-update 802

If olpc-update successfully connects to the update server, some messages should display

Downloading contents of build build-identifier
Updating to version hash xxxx
Making clean /versions/updates/...
Trying irsync_pristine update from rsync://updates.laptop.org/build-build-number
- Cleaning tree.
- Fetching contents.
- Performing incremental rsync.
Verifying update.
Installing update in /versions/{pristine,run}/xxxx

Where xxxx is a version-specific number.

The olpc-update program uses several methods to update. If "irsync_pristine" fails, it will try "irsync dirty update", and then try "Performing full rsync". As long as the last method completes without errors, you're fine. This process may take more than thirty minutes.

When the process is complete, you need to reboot, unless you supplied the -r option to olpc-update. If the new build includes newer firmware, then your XO will reboot twice. When the XO restarts the update will be complete.

After updating, you should run the Sugar activity updater from the control panel. If not, you may find that various activities are not working.

Simple offline update

Unless you are running a very old release, you can also download the new release data onto a USB disk from an internet-connected computer, and then use olpc-update on an XO to perform the update, without requiring any internet connection.

Prepare a USB drive

Your USB drive needs to be writable from the computer on which you'll download the files, and readable from a running XO (as /media/YourDriveName).

  • (Note that /media changes to /run/media/olpc for Fedora 17 based builds used in 12.1.0 and later).

Download .usb and .toc files onto USB

Insert a USB drive into a computer connected to the Internet.

Go to the download.laptop.org site to fetch the latest XO-1 release or the latest XO-1.5 release. You need to download two files from the build's directory to the top directory of your USB drive: osNNN.usb and osNNN.toc, where NNN is the numeric part of the build you are updating to. For example, if you are updating to build 711, the files would be named os711.usb and os711.toc; if you are updating to build joyride-1452, the files would be named os1452.usb and os1452.toc. Right-click (Ctrl-click for Mac) on each of the two names and choose "Save Target As" ("Save Link As" for Firefox). Save both files to the USB drive. Do not open the files.

USB update

  1. Plug the XO into an electrical outlet
  2. Insert your USB drive with the .toc and .usb files on it into your XO.
  3. Start the Terminal activity (or if you cannot do so, open the console), and enter:
sudo /usr/sbin/olpc-update --usb

If you get "command not found" errors, enter:

su -
/usr/sbin/olpc-update --usb

When olpc-update is finished, reboot to start using your new build.

Retention of previous versions

As of release 11.2.0, olpc-update only keeps 1 software version available by default (i.e. the old version is deleted after booting into the new version for the first time).

Older releases maintained two versions ("primary" and "alternate"), so that you could switch between the two (accepting any strange side effects caused by a software downgrade, not really supported by OLPC or the software that it ships).

Avoiding purge of previous versions

You can avoid olpc-update from deleting old versions in any situation by marking them as sticky, e.g. for build 802:

touch /versions/sticky/802

Restoring a previous OS

If you are using an old release where 2 versions are maintained, or if you are running a modern release and have requested olpc-update to not purge one of the versions, you can switch between the 2 versions as follows:

  1. shutdown the XO
  2. power-on while holding down the ' O ' gamepad key.
  3. release the key when you're instructed to do so
  4. check the OS version

Purging a previous OS

If you have marked a version as sticky and now wish to remove it, or if you are running an old release where the old version is maintained and you wish to free up the disk space occupied by it, you can follow the example Terminal session log shown below.

Identify what is present

List the available builds on the system.

# ls /versions/pristine/*/boot/olpc_build
/versions/pristine/802/boot/olpc_build
/versions/pristine/ed3fcf7128610f1f6fe07890f2315742/boot/olpc_build
# cat /versions/pristine/*/boot/olpc_build
802
851

This shows there are builds 802 and 851 available on the system.

Identify what is running

# cat /boot/olpc_build
851

This shows that the build currently running is build 851. Do not purge a build if it is the one running now — things break badly.

Measure free space before purge

# df /
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/mtdblock0         1048576    708572    340004  68% /

This shows roughly 340004 KB available.

Purge the unused build

# rm -rf /versions/pristine/802 /versions/contents/802 /versions/run/802

Removes all the files of the unused build. Takes a few seconds.

Measure free space after purge

# df /
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/mtdblock0         1048576    495944    552632  48% /

This shows roughly 552632 KB is available, a significant increase.

Verify builds present

# ls /versions/pristine/*/boot/olpc_build
/versions/pristine/ed3fcf7128610f1f6fe07890f2315742/boot/olpc_build
# cat /versions/pristine/*/boot/olpc_build
851

This shows only the one build is now present.

There is no need to reboot or restart after purging the alternate build.

More information

The olpc-update script works by transferring only the differences between builds from a USB drive or across the internet link from an updates server. This makes updating easier, mostly quicker, and almost always with less data transfer.

As an example of the data efficiency gain,

  • A full reinstallation from OS build 602 to 603 would normally take about 279Mb of download data, whereas olpc-update takes 16Mb of download data,
  • A full reinstallation from OS build 603 to 608 would normally take 262Mb of download data, whereas olpc-update takes 6.5Mb of download data,
  • An olpc-update from OS build 602 to 625 takes 33Mb of download data.

The time efficiency gain is less easy to characterize. It depends on the speed of the internet link, the speed of the updates server, and whether the update was able to use its server-friendly efficiency mode. An olpc-update from 602 to 603 took under 17 minutes.

The current updates server is updates.laptop.org.

Advanced usage

Update using another laptop

Q: How can I re-use the bits for multiple laptops, using a laptop?

A: Imagine that you have two laptops, one is called SOURCE and the other TARGET.

On the SOURCE laptop, add an rsyncd.conf file to /etc:

[contents]
        path = /versions/contents
        uid = root
        gid = root

[pristine]
        path = /versions/pristine
        uid = root
        gid = root

Then start rsync --daemon there.

On the TARGET laptop, use rsync to check access and identify the build that is available:

SOURCE=10.0.0.1
rsync rsync://${SOURCE}/contents

Where 10.0.0.1 is the IP address or domain name of the SOURCE laptop.

Take note of the build identifier. It will be a hexadecimal hash, 64 characters long.

On the TARGET laptop, create an appropriate 'hints' file:

export SOURCE=10.0.0.1
export BUILD=dd44...597f
python2.5
>>> import os, bitfrost.util.json as json
>>> hints = ('%(BUILD)s' % os.environ, 'normal', [('rsync','rsync://%(SOURCE)s/pristine/%(BUILD)s' % os.environ)])
>>> open('hints.json','w').write(json.write(hints))
>>> exit()

Now on the TARGET laptop, use olpc-update to upgrade or downgrade to that build:

sudo olpc-update --hints hints.json

Several laptops can all be updated in the same way from one source with the same 'hints.json' file.


Setting up a local updates server

The school server integrates with olpc-update. The XS-rsync component accepts software images and makes them available to olpc-update clients.

A dated, alternative solution is described at Upgrade Server.

For Developers

Original specification: XO updater

Source:

Maintainer: User:DanielDrake

olpc-update uses olpc-contents for most of the heavy lifting.