OLPC Firmware Q2A62: Difference between revisions

From OLPC
Jump to navigation Jump to search
m (Reverted edits by 60.251.54.208 (Talk) to last version by Xavi)
 
(6 intermediate revisions by 4 users not shown)
Line 3: Line 3:


This is the update release for the B-test build.
This is the update release for the B-test build.

''' Not uploaded yet. Awaiting testing'''


[[Image:Olpc-Q2A62.rom]]
[[Image:Olpc-Q2A62.rom]]
Line 24: Line 22:
=== Installation Caveats ===
=== Installation Caveats ===

* '''If you have a B1 system:'''
# Perform the auto-reinstall procedure at http://wiki.laptop.org/go/Autoreinstallation_image '''before''' upgrading to this firmware version
⚫
# '''DO NOT''' use olpcflash to write new firmware images. Doing so will erase the manufacturing data that was added at the factory.


* After you reflash, you must power cycle by physically removing power from the system. A warm-start or button-induced restart is not sufficient. Please remove both the battery pack and wall adapter for 10 seconds.
* After you reflash, you must power cycle by physically removing power from the system. A warm-start or button-induced restart is not sufficient. Please remove both the battery pack and wall adapter for 10 seconds.


''ATest users only:'' If you use olpcflash to write this image, you must use the --brick option.<br> Example: <code>olpcflash --brick -w image.rom</code><br> This will update your EC code.
''ATest users only:'' If you use olpcflash to write this image, you must use the --brick option.<br> Example: <code>olpcflash --brick -w image.rom</code><br> This will update your EC code.

⚫
BTest-1 users should '''NOT''' use olpcflash to write new firmware images. Doing so will erase the manufacturing data that was added at the factory.


=== Known issues ===
=== Known issues ===
Line 35: Line 35:
* Auto-repeat is slow on some USB keyboards
* Auto-repeat is slow on some USB keyboards
* NVRAM storage for configuration variables is not yet implemented.
* NVRAM storage for configuration variables is not yet implemented.
* JFFS2 does not pay attention to the bad block table.
* JFFS2 does not handle ECC
* JFFS2 does not handle ECC
* The boot menu is incomplete
* The boot menu is incomplete
Line 48: Line 47:
[[Image:olpc-Q2A62_CL2.5.rom]]
[[Image:olpc-Q2A62_CL2.5.rom]]


<code>MD5
<code>MD5:
05858dcc6a0d7318de141cd4ca537028 olpc-Q2A62_CL2.5.rom
05858dcc6a0d7318de141cd4ca537028 olpc-Q2A62_CL2.5.rom
</code>
</code>

[[Category:Firmware]]

Latest revision as of 07:03, 17 December 2008

  This page is monitored by the OLPC team.

OLPC Firmware Production Release Q2A62 - 2006-12-11

This is the update release for the B-test build.

File:Olpc-Q2A62.rom

MD5: 556086265ee9950aaa91e5662b6b5733 olpc-Q2A62.rom

Changes since Q2A54

  • EC: update to A62
  • EC: Dead battery charging fix
  • EC: Add battery charging indicator LED
  • OFW: Update to SVN 55
  • OFW: Improve performance by preallocating some DMA resources.
  • OFW: Support USB storage devices that identify themselves as "removable"

instead of "scsi"

  • OFW: Support FAT filesystem on devices with sector sizes other than 512.

Installation Caveats

  • If you have a B1 system:
  1. Perform the auto-reinstall procedure at http://wiki.laptop.org/go/Autoreinstallation_image before upgrading to this firmware version
  2. DO NOT use olpcflash to write new firmware images. Doing so will erase the manufacturing data that was added at the factory.
  • After you reflash, you must power cycle by physically removing power from the system. A warm-start or button-induced restart is not sufficient. Please remove both the battery pack and wall adapter for 10 seconds.

ATest users only: If you use olpcflash to write this image, you must use the --brick option.
Example: olpcflash --brick -w image.rom
This will update your EC code.

Known issues

  • Auto-repeat is slow on some USB keyboards
  • NVRAM storage for configuration variables is not yet implemented.
  • JFFS2 does not handle ECC
  • The boot menu is incomplete
  • Dirctory symlinks have a problem.

ATest -- Infineon RAMs only

Thise is a special purpose image. Do not use except on A-test boards with Infineon RAMS.

For more info see Upgrading_to_LinuxBIOS#Checking_your_DRAM_type

File:Olpc-Q2A62 CL2.5.rom

MD5: 05858dcc6a0d7318de141cd4ca537028 olpc-Q2A62_CL2.5.rom

Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=OLPC_Firmware_Q2A62&oldid=187530"