Cambridge Friends School

From OLPC
Jump to navigation Jump to search


Pencil.png NOTE: The contents of this page are not set in stone, and are subject to change!

This page is a draft in active flux ...
Please leave suggestions on the talk page.

Pencil.png

Status

This program is already in the works and development and training has been started (see Curricular Development)

Status updates will be kept in this section.


It's not a terribly formal doc. The reason for this is that formal documents are rather dull to write (and read) and we want people to read this, comment, and contribute. We care about the content and how much it makes sense to other people more than we care about presenting this in accordance with some hypothetical protocol. Irreverence may ensue. You have been warned.

Introduction

Disclaimer: Please bear with us. We haven't done this before. Comments, criticisms, feedback, and suggestions for improvement are always tremendously welcome - leave a note on the talk page.

The short version: Give each 1st and 6th grader an XO, then run a "learning buddies" program that pairs them up to explore how they can integrate the XO as a tool into the existing CFS curriculum.

This document is a proposal for an One Laptop Per Child (OLPC) pilot for the 2008-2009 school year to be run in classrooms representative of the age range of students at Cambridge Friends School (CFS), a private pre-K to 8 school in Massachusetts. The main points of the program (aside from giving each child, teacher, and relevant administrator a low-cost, rugged laptop running open-source educational software, to be owned by them and used as a personal learning tool and information access point, gateway to exploration, and all that) are that it will:

  1. Be financially and infrastructurally independent - housed and funded from within the school itself (with help from local volunteers and sponsors). See #Budget.
  2. Cultivate and support a local grassroots community around the school that will contribute technology, content, and mentorship to both CFS and the OLPC program at large. See #Local outreach and community involvement.
  3. Involve parents, especially through their children doing outreach work. See #The parents.
  4. Have older children serve as technical support and project mentors for other students within the school as well as those outside it. See #Students teaching students.
  5. Have people of different ages and disciplines from both within the school and around the world together on self-defined, self-designed, self-led projects that have an impact on the world outside the walls of CFS. See #The activities.

How do we plan to do this? Read on.

Contact information

The obligatory blurb about the current draft's author: Mel Chua is an electrical and computer engineer currently working in open-source software development, studying engineering education, and writing in the third person. She has been heavily involved in volunteering for OLPC since Feb. 2007, organizing the first Jam in Boston, running the Summer of Content program, and interning at the OLPC Boston office as part of the Content team despite her hypothetically technical background. Aside from building prosthetic hands, evolutionary robotics simulators, and doing embedded programming for USB peripherals and wireless motion control platforms, Mel has been teaching and developing curriculum for 8 years and has taught and TA'd everything from a math camp on fractals with middle-school students to intro electronics with undergraduate engineering majors. For more details and contact information, read her user page.

Mel is also hoping that some blurbs from other contributors (and other contributions from said contributors) turn up in this section very soon.

About OLPC

Warning: What you are about to see is boilerplate copy-paste designed for formal things like press releases. A far more interesting and up-to-date way of finding out what's going on is reading the OLPC wiki.

One Laptop per Child (OLPC) is a non-profit organization created to design, manufacture, and distribute laptops that are sufficiently inexpensive to provide every child in the world access to knowledge and modern forms of education. The rugged, Linux-based, mesh-networking-enabled, and power-efficient laptops have begun to be deployed to children by schools across the world on the basis of one laptop per child. OLPC is based on constructionist theories of learning pioneered by Seymour Papert and later Alan Kay, as well as the principles expressed in Nicholas Negroponte's Being Digital.

About CFS

Warning: What you are about to see has simply been yoinked from CFS's front page. It's probably a good idea for someone to tweak it and point to where more recent updates can be had.

Cambridge Friends School is a co-educational elementary school (pre-K - grade 8) established in 1961 under the care of Friends Meeting at Cambridge, Religious Society of Friends (Quakers). They have 220 students, 23.3% of whom receive financial assistance. There are two classes per grade, with a maximum class size of 17; the current class size average is 12. See CFS's mission statement.

Proposal

  1. Give laptops to students and get them to explore, for credit, topics they are interested in (and give them time and resources to do this).
  2. Give teachers laptops and work with them to facilitate and guide, rather than strictly direct, the projects students choose to work on, and to communicate to students, parents, and administrators the exploratory and experimental work of students (it's always a risk to try something new).
  3. Give parents ways to more directly see what their children are doing inside the classroom, and opportunities to get involved within their field of expertise.
  4. Give students teaching opportunities to mentor younger students as well as (possibly older!) people outside the CFS community.
  5. Plan and integrate learning activities into the existing CFS curriculum and into the existing efforts of our partners (work smarter, not harder - leverage existing projects to be more fruitful).
  6. Reach out to the community around us and beyond us.
  7. See where things go from there...

The laptops

The XO is a low-cost (~$200 at the time of this writing), rugged laptop designed to survive things like 5-foot drops onto concrete, or being left in a bucket of water by a small child in Peru for several hours (both of which have happened; the XO kept working). Aside from its extreme ruggedness, here are a few other salient details:

  • Built-in camera and microphone for recording the world around you
  • Microphone in port doubles as an analog sensor input - for a few cents, you can probe pressure, temperature, voltage, pH, and generally have a sophisticated science lab that weighs 3 lbs.
  • Sunlight-readable reflective screen means that bright light makes it easier, not harder, to read
  • Low power consumption, takes a wide range of charger inputs; hook it up to a car battery, a solar panel, an AC wall outlet, a hand crank...
  • Can flip over into tablet mode - great for use as an e-book reader.
  • Built in mesh network connectivity; kids can share files and collaborate in activities even without a wifi connection available (though it can connect to normal 802.11 wifi as well). Most software activities on the XO are designed for collaboration.
  • Open-source - kids can explore and modify the software running on their own computers with the help of a large, friendly, enthusiastic, and in many cases local grassroots group of experienced programmers.

For more details, see the Hardware specification. If no XOs are available before the pilot's start date (Fall 2008 or Spring 2009 - one of the semesters of the 2008-2009 academic year) other low-cost laptops may be substituted.

The students

We'd propose giving the XOs to all students in the 1st and 6th grades for the pilot year. It seems like these are commmon "transition years," ages at which students are likely to be new to the school, and having the support of an older child (or a younger child to mentor) would be a beneficial relationship especially around this time.

The teachers

Students from the Illinois Math and Science Academy Chapter worked one-to-one with 6th grade teachers Ms. Sally Wakeland (Spanish), Mr. Rob Garrison (History/English), and Ms. Victoria Swanson (Math/Science) on finding and training them in activities they considered useful in their classes. The activities that they chose were included in the customization key for the eventual XO deployment.

Schedule

This schedule is a strawman.

Spring 2008: Community development

  • Gather interest and support pledges from the OLPC Boston community
  • Work with the Olin repair center to set up a technical support plan
  • Get interested teachers and parents informed of how they can contribute
  • Fundraising for supplies (if needed)

Summer 2008: Setup and training

  • Have the OLPC Boston community develop software and activities in response to the curricular requests of the teachers
  • Set up connectivity and charging infrastructures in the relevant classrooms
  • Invite teachers to workshops to learn about the program; connect them with teachers from other pilot schools and countries so they can share ideas
  • Find someone to document the project's progress throughout the year

Fall 2008: Launch and initial activities

  • Distribute laptops
  • Start!
  • Schedule weekly (for the first month) and biweekly (after the first month) visits and activities with the local OLPC community to explore different ways the XO can be integrated into the curriculum

IMSA Intersession: Boston ILXO Deployment

The IMSA OLPC Chapter will be traveling to Boston to launch a classroom deployment of OLPC the week of January 4-9. Stay tuned, we will be posting more information and pictures soon! Participants:

  • Arjun Nayini (anayini@imsa.edu)
  • Jason Olson(jbob@imsa.edu)
  • Katie Tu (ktu@imsa.edu)
  • Scott Swanson
  • Mel Chua
  • Yifan Sun

Goals

  • Make a build and customization key for CFS.
  • Make a school server for CFS.
    • XS 0.5.1-dev3 vs more traditional Fedora/Ubuntu box
    • Network: builtin wireless cards vs new AP (no network to leverage)
    • Scott needs to doc the heck out of this in a separate subpage as it's pretty clear we will fail to get this done on time
  • Document all of the above.
  • Do the parent/student intro.
  • Teacher training.
  • Meeting with CFS teachers in order to explain details

Roles

  • Katie: Teachers/CFS-to-us interface.
    • Make sure teacher training happens
    • Get the parent/student intro to be awesome
    • Teacher interface for build & customization keys (Arjun is tech minion)
  • Arjun: Build and customization keys (tech minion for Katie), documentation (mostly XS, but of everything in general), FUDcon presentation
  • Jason: XS (Scott as Jason's technical minion)

Things that would be nice

  • Train the student tech team.
  • Sugar Labs - XS, testing

January 3, 2009-January 9, 2009

  • January 3-talked delegated roles
  • January 4-met with Harvard OLPC chapter, prepared the first set of activities for teacher meeting on the 5th
  • January 5-tested and finalized activities and had teacher meeting, got a response from all teachers as to what specific activities they would like
  • January 6-test day and work day, tested additional activities and made up the FINAL LIST for teacher training. had a general customization key and then favorite different activities for the circle view
  • January 7-second teacher training workshop
  • January 8-after school activity for children (student tech team)
  • January 9-FudCON presentation
January 3, 2009
  • Explained basics of how an XO works (technical aspect)
    • Software stack-layering model-each layer interacts with the other (layered from physical (bottom) to activities (top)
      • XO/Application Interface (API)
        • Activities
          • Journal
            • Sugar Non-Sugar
              • OS (Fedora-ish)
                • Open Firmware: Shell, Kernel, Network
                  • Hardware
  • Define
    • Build: Activities-->OS (Fedora-ish)
    • Customization Key--> Activities (bundles)
    • Development Key--> password that gives you permission to use currently being developed builds (builds that are non-signed and non-released)
  • Sugar::windows; education::business
    • WINDOWS
      • business based (i.e. my documents/files)
    • SUGAR
      • education based (i.e. communities, activities)
  1. .sharing=collabration

(mesh network, my neighborhood)

  1. .reflecting/documenting=journal
  2. . discovery=activities
      • everything is automatically saved-->history is logged by the applications;shows learning/process of thinking
  • The Development Cycle::Textbook writing Process
    • Build 1--> Build 2--> Build 3-->Build 4
    • release a build every six months
  1. first start adding whatever you want
  2. then start editing
  3. get a release candidate
  4. fact check
  5. spell check
  6. release. (but at the same time everything is still being updated)

you can update like firefox(?)

  • School Server and Mesh Network
    • SERVER:one hub with people connecting from one distance
    • MESH: one hub with one person connected...one person connected from them...peer to peer connecting

much better when in a faraway place (i.e. village in the middle of the dessert); one access point

    • SCHOOL SERVER
  1. gives infrastructure

access point; mesh

  1. squid=local cache; able to see what is used a lot, save on the server and save it locally
  2. local moodle=community level content; common web server
      • mailserver
      • establishing a city library
January 4, 2009
  • Prepared for meeting with Mac/Katelyn at 5PM

30 minutes

  • success criteria: know what we're doing with CFS

through Harvard when

    • "working relationship"
  • Tried to use Emulator on Windows
    • at first try, cannot connect to network

even after entering wireless name into server shut down

    • open again-worked on jason's and katie's computer
    • check for software updates
    • it works!
  • Learned Terminal
    • command lines
      • cd: change directory
      • ls: list contents
      • cp: copy
      • cd: go up in directory
      • cp -r: copy recursive (copies everything in the folder)
      • rm: remove
      • wget: download
      • mu: move
  • Talked about Journal and Backlight
  • Compiled a list of possible activities for the customization stick
  • Discussed the student server
January 5, 2009

+Testing Results+

  • Log-needed to reinstall on XO (only Boston ILXO Deployment ones)

+Issues:

    • No limit to how much one XO can vote
    • Journal doesn’t document results

+Procedure:

  1. Computer with Poll building can create a poll and then SHARE IT WITH NEIGHBORHOOD (make sure that Mesh network is the same)
  2. Other computers click on the poll icon below the start computer (will be in the same colors as the XO)
  3. Join---there should be little notifications that tell you that polls are being shared and for you to join each poll (Yes/No)
  4. Vote.
    • you can also create your own poll underneath THAT poll builder and have it automatically shared with people who are underneath that application
    • note if the person who made the poll EXITS the poll builder application, then the poll is shut down.
    • if you enter again, then you can't see the results (no saving and with saving)
    • Journal notes down different activities and which people are joined (with colors) but can't note down which questions/results that you got.
  • View Slides-need to test; find zipped image files; works, but only in zip format and all have to be JPG, GIF, etc.
  • Ruler-works, has four different types (good for circles/measuring angles/measuring things).
  • ePals- 13 or under, need parent/guardian email; built in pen pal system; need a username and password in order to connect to other people; what does it do beyond the normal browse function?
  • Words-default is yo, yo; able to translate a lot of words from English to Spanish, Italian, Portuguese, French and German (dictionary); very good for foreign language…two way…can’t do whole sentences/passages
  • Write- works, can insert images, tables
    • If you want one from the internet
  1. Copy and it should show up under the objects (which will pop up when you want to download an image) as clipboard + url.
  2. Insert and save as a different document name underneath the activity tab so that you can distinguish in the journal which is which
    • no way to open documents from the actual write activity
    • can't open with Word if working from XO to actual PC
  • Memorize-one of the preinstalled ones, so definitely WORKS
    • Procedure
  1. create one
  2. you can save game to my objects (journal)
  3. you can choose between grouped and ungrouped (grouped-pairs are different, ungrouped-match the same thing);saves as a different object/game if you change one little thing (no overwrite function)
  4. load game under play tab and share with neighborhood
  5. based on turns, if you get it right the first time then it goes to the next person
  • Geoquiz-
    • need to use the right arrow control pad and the actual arrow pad on the keyboard
  1. choose between Africa or South America
  2. Identify the country that is highlighted from a list
    1. . if it is right, then the country gets highlighted in green and there is a Correct! sign
    2. . if it is wrong, then there is a red wrong button and it just skips to another highlighted country
  3. . once you have identified the entire continent…
  4. . goes immediately into pollbuildertakes a long time to load
  5. . not complete?
    • Automatically closes/goes to PollBuilder after it is done with the geography quiz but not if you have Log open, it just closes.
    • Can we expand to other continents (Africa and Asia...other continents)
January 6, 2009
  • Concerns:
    • connecting to wireless (when it’s protected)
    • the intro to programming stuff
    • Powerpoint stuff
    • structuring the next meeting with teachersdo a mock one?
    • Geoquiz: can we expand? who is in charge?
  • Additional Testing:
    • News Reader-works definitely, needs internet, approved by katie
    • COBBLE-not applicable for academic studies
    • Maps-takes a long time to connect to map server, needs a really good internet connection in order to work; operates as GoogleMaps/Earth
    • GPS Roadmap-if you want more maps, you need to bring them on a FlashDrive (more trouble than it’s worth); not applicable for academic studies
    • View Slides-Existing PowerPoint presentations (and other presentation types) can be manually converted to SVG slides using the following process:
      • Create a PDF file from the PowerPoint presentation. On Mac OS X, PDF creation is built into the printing system. On Windows, software such as CutePDF Writer allows you to add a virtual PDF printer. Similar functionality exists as part of the CUPS printing system on Linux.
      • Using a vector graphics program such as Adobe Illustrator or Inkscape, open the PDF file a slide at a time, and save as an SVG.
        • This method may have some issues with fonts. It also does not create the most efficient SVG files.
        • Also can save each individual slide into a PDF format
      • If you download a ZIP FILE and open it in Journal, it should open immediately with View Slides
      • FROM THE WIKI: The image files can be JPEGs, GIFs, TIFFs, or PNGs. You can put them all in the root of the Zip file, or you can put them into subdirectories. The important thing is that the files and directories are named sequentially.

To make a file like this first create some image files and name them sequentially: image001.jpg, image002.jpg, image003.jpg, ...

    • Read Etexts-only Project Gutenberg files that are plain text; will soon also be supported by the Read activity…download the zip versions
      • once you download the zip you have to copy it to clipboard and then choose to open with read e-texts (plain text files only!)
    • Read-only PDFs (Google Books, other stuff)
    • Classroom Presenter- load slide shows? what files does it take?
    • SimCity vs. Micropolis—all the same, but Micropolis is probably better
  • For Wednesday To Do List
    • fix Read…will not open up PDFs and stay open
    • finalize list of activities
      • put them on a flash drive and put them on at least five computers
    • figure out classroom presenterwhat kind of files can actually be opened with it?

answer these questions:

    • make up the sheets for student activity/find out what time it will actually be at
      • find out how to deconstruct an XO
      • find lab manuals for the school
  • How to run customization stick using Terminal
  1. open up terminal
  2. type in cd /media
  3. type in ls
  4. type in cd KINGSTON
  5. type in cd Activities
  6. ls
  7. nano loadAll
  8. get out…but don’t save (CTRL X)
  9. bash loadAll
  10. and then type in yes/no according to what programs you need
January 7, 2009

Agenda for second teacher' meeting

  1. How to connect to wireless/do collaborative activities (first thing on agenda for Wednesday), demo with Chat)
    1. have to be on the same mesh network in order to see each other and share stuff; technically, should be able to be on the same wireless and mesh network and be able to share-best case scenario
    2. when sharing multiple activities, all activities will be shown on the neighborhood view, but only the one might not be able to share more than one activity
    3. you can only pick one: either mesh or wireless..one always takes the other off
  2. Explain differences among Read E-text (zipped+plain text), Read (PDF) and View Files (zipped+Jpgs)
    1. Shared an example of each document on the XOs…see if people can view
    2. explain to teachers that they have to download the actual file and then share it on neighborhood
  3. Demo one on one with each teacher’s lessonone on one, show all activities on the Favorites view
    1. Arjun- Math/Science
    2. Katie-History/English
    3. Jason-Spanish
January 8, 2009
  • Agenda for Student After School Activity (potential for Student Tech Team)
  1. Intro to the XO
    1. How to work it
      1. distinguish between mesh and wireless
      2. the different activities and what one can do

Six kids were introduced to the XOs.

  • What did not happen, but would be nice.
      1. Take apart the XO and have kids do so too
    2. Contact sheet
      1. Harvard/Olin/OLPC—Mel
    3. Intro to troubleshooting
      1. introduce to terminal and log
      2. show them the ctrl alts

Outcomes

  • Customization key made for three teachers(math/science, history/english and spanish)
  • Three XOs sent back home with teachers
  • Six middle school children of CFS introduced to the XO
  • Presented week-long work at FudCon 2009
  • Work on Server started

Spring 2009: Outreach and giving back

  • Host an open house for parents - but also local scientists, engineers, educators, etc. - to see the children present the work they've done
  • Mentor other area pilot schools?
  • Papers? Conferences?

Equipment needed

XO laptops

Note: I'm making up these numbers - folks from CFS, do you have more accurate counts on how many of these you'll need?

  • 1 laptop per child in participating classrooms (~15 students x 4 classrooms = 60 laptops)
  • 1 laptop per teacher in participating classrooms (4 laptops)
  • 1 laptop each for supporting teachers and administrators... (5 laptops)
    • music teacher
    • science teacher
    • math teacher
    • art teacher
    • technology coordinator
  • 5 extra laptops for emergency repairs, community events, and short-term loans to external volunteers

Total: 74 laptops

Power adapters

Power adapters use the normal 120VAC from wall outlets, which are readily available throughout the CFS campus. We'll need to get some power strips and extension cords for children to all be able to plug in at once, but these are easily obtained from local hardware stores at affordable prices.

Wifi network

The CFS campus already has wireless internet access. Whether the coverage and bandwidth are sufficient for an XO pilot needs more investigation. This may necessitate the purchase of an extra wireless router or two, but they are easily obtained from local computer stores at not unreasonably exorbitant prices.

School server

The XS school server will not be an initial vital component of the CFS pilot in terms of having a standalone desktop/server in every participating classroom running the official XS software release. (It's possible that this could be a local grassroots group project; a team of volunteer Boston-area developers are already implementing an XS server in their spare time.)

However, there will be a storage repository of some sort specifically dedicated to backing up the CFS XOs (this could easily be done with a single desktop on campus with several large hard drives in a RAID array, or with off-site hosting) as well as an "external portfolio" website where students and teachers can upload and host their work. When possible, students and their collaborators will host their work in existing knowledge communities such as Curriki, WikiEducator, Wikipedia, Launchpad, and so on in order to make their contributions immediately part of a global collaboration and a larger body of knowledge.

Peripherals and sensors

Library books

Materials

Operating expenses

Support and training

Boston-support-structure.png

Local support teams

Local support teams are similar to small businesses (in fact, in some cases they may be small businesses) in that they offer a particular kind of product or service to pilots in a given geographic area; in this case, Boston and surrounding towns and suburbs. They work with deployment schools with the help and facilitation of that deployment school's loop team.

Local support teams tend to follow particular interest groups within the global OLPC volunteer community; for example, the Boston-area server support team would follow the school server mailing lists and talk with OLPC community members from New Zealand, Nepal, etc. who are also working on and deploying the XS. Local support teams allow these global interest groups to utilize their skills, time, and expertise to assist with (or even do) on-the-ground work in actual physical deployments.

Like small businesses, local support teams are free to choose which deployments and loop teams they want to work with as well as at kind of volunteers (or employees) they want and how to train and direct them. Similarly, loop teams and deployments are free to choose which local support teams they want to utilize the services of.

Examples of local support teams include (but are not limited to): translation teams, content creation / writing teams, peripheral design teams, fundraising teams, teacher training teams, museum exhibition teams, and so on.

Loop teams

Loop teams act as the gateway between deployments and the local volunteer community around them. Just as local support teams tap into the global OLPC (and other) resource pools to implement solutions in their area of interest (for instance, an off-grid power setup) at a particular geographic area, loop teams tap into local support teams to implement solutions in their particular deployment school.

Loop teams also keep the local volunteer community (including the deployment school's parents and students, and local media) "in the loop" (hence the name) on what is happening with their deployment, along with volunteer opportunities to get involved with that particular school.

Total

Partners

Curricular development

One of the major goals of this deployment project was to create a customization stick that was able to load all of the laptops in the pilot with a number of activities each of which tied into the previous curriculum at CFS. This included meeting with three teachers (Math/Science, Spanish, and English/History) in order to discuss possible activities as well as the manner by which they would be woven into the curriculum.

We feel that this is an essential component of the deployment because

  • 1) teacher involvement with, interest in, and understanding of the OLPC project as well as the XO itself is necessary to keep a pilot program running smoothly after its inception*
  • 2) that integration into the curriculum is required in order to get the pilot running in the first place.*

Our customization stick development was centered around three teachers: Ms. Victoria Swanson(Biology/Math), Mr. Rob Garrison (History/English), and Ms. Sally Wakeland(Spanish).

Some common activities between teachers included chat, write, browse,memorize,Poll builder, read, and View Slides/lang-ko.

Spanish - Our goal for the Spanish curriculum was to integrate the language into all of the activities being used. Certain problems with the current curriculum included only 2 meetings per week. We implemented the Record activity in order to allow the students to create audio/video journals during the days that they didn't meet for Spanish. We also decided to use EPals in an attempt to find another school of comparable curriculum and size to try to make a 1 to 1 English-Spanish student network, including possibly a Spanish-speaking sister school that also received a deployment of XOs. Activities such as Memorize were also used because of their flexibility to be used in any language. Geoquiz was also implemented as Latin American geography is part of the Spanish curriculum. Additionally, Words, Speak and wikibrowse [Sp] were also useful tools.

Biology/Math - The Biology curriculum was focused on very specific aspects of topics ranging from cellular biology to electricity and magnetism. We decided to use WikiBrowse to give the kids access to information without a connection to the global internet. We also provided the class with Ruler, Distance, and Stopwatch for the introductory lessons to time and measurement. Finally we added Turtle Art in order to tie the math curriculum to the visual arts program.

History/English-The 6th grade history curriculum focuses on three main ideas: geography and culture, ancient cultures and contemporary connections. Therefore, specific activities that we selected (with the cooperation of the teacher) were Read Etexts, Geoquiz, wikibrowse, Micropolis, News Reader, and Maps. The history teacher was also interested in the different read programs (Read and View Slides) and Record.

The complete list of activities included on the customization keys:

Notes - There are several factor that we believe are required. We think that a teacher training session is important and needs to be both a teaching session as well as a learning session. Time should be given for the teachers to explore the laptops themselves. It is also necessary to create a student tech team or a smaller group of students capable of sustaining the pilot through repairs and troubleshooting. Finally it is vital that support groups including IRC and the OLPC support email line are communicated to the pilot members. (We feel that it is important to move the pilot into independence slowly and to be available for help in the weeks following deployment)

Customization stick

The customization stick contents are too big to just post somewhere, so instead we have provided with a python script that will download what you need and instructions for making your own customization stick.

The stick itself is just a USB drive devoted solely for customizing laptops. If composed correctly, one can use this stick to customize the activities included in many laptops at once, hence its use in deployment.

Instructions to make this stick is as follows:

  • Download installActivities.zip
  • Unzip it somewhere. Go inside and run the downloadAll.py script
    • Make sure you have some version of python installed. If not, go to the python download and download the installer. Double click it to install.
    • Open a command line using Start --> Run --> cmd
    • Navigate into the installActivities using cd, and run the script
cd Desktop\installActivities
python downloadAll.py
  • Copy and paste the downloaded files into the customizations/bundles folder, ie
cp -r Desktop\ActivitiesDownloaded\* Desktop\customization\bundles\
  • Drag and drop the contents of the customization folder (but not the folder itself!) into a blank USB drive
  • On the XO, stick in the USB and reboot it. If the laptop is running an unsigned image, you may need to hold down the 'X' button while it's booting, but this shouldn't be necessary with the OLPC-Boston laptops provided.

Technical deployment

Repairs and support

Support can be given from three different sources:

  • xo-IRC activity on the XOs (install-able via wiki.laptop.org/go/Activities/All
  • Olin and Harvard chapters
  • emailing IMSA people

Outreach, promotion, teaching

Concerns

Too much extra work

The School Server software (XS) needs to be modified to be dovetail into the existing infrastructure, as the XS software was originally designed to serve as the only infrastructure in the deployment area. As a result, security and networking issues still need to be addressed in the software before the server is put into action.

Support/repair concerns

We are still working on putting together a student support crew, starting with a meeting on January 8, 2009 with some volunteer students. They will have to be trained in basic software and hardware support quickly, as the Illinois Math and Science Academy Chapter is leaving January 9.

Health and ergonomics

The keyboards may be slightly small for sixth grade hands, as these laptops were designed for a slightly younger audience.

Gaming/distractions

As with any computer related activity, it is the teacher's responsibility and students' expectation to keep students on track. The terms of use of XO's in the classroom is no different than the use of the mobile laptop lab cart currently in use at CFS.

Inappropriate content

While these laptops are on loan to students and can be considered private property, the students should be aware that all of their activity can be monitored through the journal by anyone with authority. The Harvard Chapter has talked about this briefly.

What's needed / how to help

Help refine this proposal

Create materials for specific classrooms

Volunteer technical support

Mentor and support student projects

Funding and equipment

Ask us to teach you

Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Cambridge_Friends_School&oldid=191144"