Test Config Notes/lang-es

From OLPC
Jump to navigation Jump to search
  Para desarroladores
  Please copy/paste "{{Translationlist | xx | origlang=en | translated={{{translated}}}}}" (where xx is ISO 639 language code for your translation) to Test Config Notes/lang-es/translations HowTo [ID# 256831]  +/-  



Previo Siguiente

Builds e Infrastructura

Paso 0: obten una llave de desarrollador y deshabilita la seguridad

Instrucciones para esta area fue enviada a Activation and Developer Keys

olpc-update

Esta sección ha sido movida a Olpc-update.

Notas del firmware

Para instalar una nueva versión: Manual Firmware Install

Arreglando datos del reloj XO

From build 693 on (maybe earlier), the time is set automatically the first time you connect to the network.

From build 641 on (maybe earlier), if you have a good internet connection you can set the date/time by logging in as root and typing: 

 ntpdate pool.ntp.org

~~ You can find out the current date and time in a terminal window by typing "date". There is currently no way to get the clock to be on the "desktop" or home screen; but you could write that in Python as a change to Sugar-shell, and submit the improvement to the XO team! Let Love Flow Listen~~

On unupgraded early Give One Get One laptops, ntpdate may not be installed. You can set the date/time manually by logging in as root and typing: 

 date

which will show the laptop's current time and date. Using the same date and time format returned by the date command, type: 

 date --set "Mon Apr 1 etc. etc."

Some pre-test machines don't have valid manufacturing data. This isn't too much of a problem, but they also have clocks which are set to crazy values, which is. To fix this, boot and press Esc when prompted to get an OFW prompt. At the 'ok' prompt type: 

clock-node @ iselect  decimal   00 40 16   14 09 2007  set-time

The numbers here are the time and date: second, minute, hour, day, month, year. You can substitute the current time and date if you like, but the machine will activate correctly as long as it has a somewhat-sane date. You can use the date above, for example.

Steps to fix bad clock value on write protected machines

Personalizar la imagen NAND

Pruebas de Internacionalización

Toda la información para Quanta para poner en el flash SPI y asegurar que las laptops vendrán usando el teclado apropiado y el lenguaje indicado descrito aquí: mfg-data

Análisis del log de cambios del kernel

At http://dev.laptop.org/~bert/joyride-pkgs.html is the joyride changelog. In it you'll see the version of the kernel. An example of a Kernel change is in joyride build #258, and the new version of the kernel for joyride build #258 is kernel.i586 0:2.6.22-20071111.5.olpc.c1d02f5e6853b99

You can find that information for _any_ kernel by running 'uname -r'.


That 'c1d02f5e6853b99' uniquely identifies the version of the kernel. You can look it up in git (or gitweb) and see the changelog for precisely that kernel: http://dev.laptop.org/git?p=olpc-2.6;a=log;h=c1d02f5e6853b99

From that page, you should fairly easily be able to work out whether the patch you're interested in is included or not.

Actividades y Sugar

Ver Actividades.

Verifica la versión que tienes de tu actividad

In Release notes/8.2.0, the Home view in List view mode displays the version of each installed activity.

In any release, each activity's activity.info file has this information. 

 cat ~olpc/Activities/Activity_name.activity/activity/activity.info
    • There may still be activities in the old location /usr/share/activities/
  • Look for the activity_version setting.

Desactivar suspender/resumir y el protector de pantallas

Puedes apagar suspender/resumir escribiendo: 

 touch /etc/ohm/inhibit-suspend

Apaga el manejo de energía:

  • Para un booteo (hasta que la laptop sea reiniciada): 
     /sbin/service ohmd stop
  • Para todo los reinicios:
    • Como root, tipo:
     rpm -e ohm

Para apagar el protector de pantalla, teclea: 

 xset dpms force off

Panel de control

Teclas rapidas

Wireless y redes

Eliminando la configuración de redes

  1. Abre una terminal virtual
  2. rm /home/olpc/.sugar/default/nm/network.config

Conectividad al Apple Extreme

  1. Ve a: http://www.corecoding.com/utilities/wep2hex.php y convierte una contraseña en una hexadecimal.
  2. Haz clic en el AP en la vista de vecinadario matriz (neighborhood mesh)
  3. Escoje el ingreso hexadecimal para una llave; y escoge la llave 'compartida' en vez de 'abierto'.
  4. Debes ser capaz de asociar y autenticarte ahora.


Matriz de AP inalambricos - Se necesitan pruebas de voluntarios

Probando la diferentes condiciones de conectividad

  1. Bajo un arbol
  2. Conectado a un AP
  3. Una laptop actuando como un MPP
  4. Misma matriz mismo servidor

Prueba la red y los detalles de maya (mesh)

Modifica la secuencia de descubrimiento en maya (mesh)

You can put the following values in /etc/NetworkManager/mesh-start

  • school-mpp
  • infra
  • xo-mpp
  • local

These will control where the mesh device starts. Since the mesh device is the first device that gets picked at startup, this affects the immediate connection search of the laptop.

Remember, the current automatic connection cycle is this. You can jump to a specific step in this cycle by putting the string above into mesh-start. 

/* Steps:
 *
 * 1. For each channel in [1, 6, 11]:
 *    a. try DHCP
 *    b. if DHCP times out, try next channel
 *    c. if DHCP response includes a non-link-local IP address,
 *      then CONNECTED/DONE
 *
 * 2. Try last successful AP connection
 *    a. if success then CONNECTED/DONE
 *
 * 3. For each channel in [1, 6, 11]
 *    a. try DHCP
 *    b. if DHCP times out, try next channel
 *    c. if DHCP response includes a link-local IP address,
 *      then acquire autoip address and apply DHCP settings (except for
 *      IP address), CONNECTED/DONE
 *
 * 4. Jump to channel 1
 *    a. acquire autoip address, CONNECTED/DONE
 */

Actualiza el firmware inalambrico

Please note that you do NOT need to get newer versions of wireless firmware if you are running a released version of OS. All releases include an appropriate, tested version of wireless firmware. These notes are for testing purposes only.

  • You can check what version you are running with: ethtool -i eth0
  • Next download the latest Libertas firmware, (non-released, released), and unzip it with: tar xzf <filename>
  • Move, delete or rename the 'usb8388.bin' file that is currently being used in /lib/firmware/'
  • Copy the new 'usb8388.bin' file from where you unzipped it into /lib/firmware/' (if the .bin file has a name other than usb8388, change it to usb8388.bin)
  • You could Reboot, or simply rmmod usb8xxx ,then modprobe usb8xxx ; then check the version with: ethtool -i eth0

Activa el debugeo del wireless

Instrucciones en como activar el debogeo de drivers puede ser encontrado aquí.

Convierte tu XO en un sniffer

  1. Install tcpdump ('yum install tcpdump' will probably do it)
  2. killall NetworkManager
  3. ifconfig msh0 down
  4. ifconfig eth0 down
  5. echo ${TRAFFIC_MASK} > /sys/class/net/eth0/lbs_rtap
  6. ifconfig rtap0 up
  7. tcpdump -i rtap0 -w outputfile.dump
  8. when you done capturing traffic type ctrl-c

TRAFFIC_MASK bits:

  • Data frames: 0x1
  • Mgmt frames but beacons: 0x2
  • Beacons: 0x4

Capturando los datos de wireless

Instructions for capturing wireless data can be found here.

Turn on MPP Capability

In build 693 and later, automatic MPP (mesh portal) is turned off. If you want to turn it on, edit /etc/NetworkManager/dispatcher.d/mpp.py and remove the line near the start which says 'exit 0'. Next time you connect to a network, the mesh portal will turn on.

In build 570 or so, automatic MPP (mesh portal) is also turned off. If you want to turn it on in these early builds, log in as root (either from the VT with Ctl+Alt+F1 or 'su -' from the Dev Console in sugar), and do: 

 /sbin/chkconfig --level 345 NetworkManagerDispatcher on
 /sbin/service NetworkManagerDispatcher start

Next time you reboot (or the next time you click on an AP) the mesh portal will come back on.

Warning: Laptops in MPP mode will not participate properly in sharing with other XO laptops.


MPP with ppp or eth0

To make an XO into an MPP with PPP (modem) or Eth0 (usb-eth dongle): XO_with_USB_Cellular_Modem

Mesh y WDS

Alguna información en problemas relacionados para una mala interacción entre routers inalambricos Linksys y XO puede ser encontrada aquí.

Configurando un servidor Jabber

Configurando Ejabberd

Seguridad

Activación y la llave de desarrollo

Para aprender sobre activación y llaves de desarrollo de como hacer tu laptop insegura, ver Activación y Llave de desarrollo.

Como pre-activar una laptop: Pre-active una XO

Prendiendo y apagando aislamiento de actividades (encapsulamiento)

En la actualización.1 (build 630+), aislamiento esta activado.

Para apagar el aislamiento
rm /etc/olpc-security && reboot
Para reactivar el aislamiento
touch /etc/olpc-security && reboot


Anteriormente las construcción de joyride, para jugar con actividades de encapsulamiento, debes:

  1. rainbow-daemon
  2. touch /etc/olpc-security
  3. restart sugar (e.g. tipos Ctrl-Alt-Erase)
  4. Intenta varias actividades; porfavor examina la salida de rainbow-daemon
  5. rm /etc/olpc-security
  6. restart sugar

Nota: es importante que el rainbow-daemon deba ser ejecutado cuando Sugar reiniciando. Así, rainbow-daemon debe ser iniciado ya sea en la terminal virtual (i.e. tecleando despues Ctrl-Alt-F1 [F1 is the mesh-key]) o bajo SSH.

Porfavor preguntas directas y comentarios dirigirlos a mi: --Michael Stone 13:02, 17 September 2007 (EDT)

Logs

Que logs van con los bugs?

  • Activities
    • All activity logs are located in /home/olpc/.sugar/default/logs
    • Activity logging is turned on by default in builds after 650/joyride 350
    • These logs will contain any warnings and or errors with tracebacks, which should help the developers debug their activity
    • Also, the shellservice.log will sometimes contain information as to why an activity failed to launch.
    • Note: each time you restart X, the old logs will be stored in a directory in the same location, and new ones will be generated.
  • Journal
    • There is a journal log in /home/olpc/.sugar/default/logs
    • Also, the datastore.log file often has implications for problems with the journal.
      • Especially with problems resuming files or transferring files to/from USB keys
  • Network/Collaboration Problems
    • /var/log/messages
      • This is a circular buffer, which contains a lot of low level debugging information
    • in /home/olpc/.sugar/default/logs
      • presenceservice.log contains higher level network debugging information
      • telepathy-gabble.log/telepathy-salut.log (logs for salut and gabble; the collaboration software)
  • Kernel Problems
    • dmesg (another circular buffer, which contains low level debugging information)

Activa todos logs

Para activar logeo completo del kernel

  • cd /boot
  • modify olpc.fth
  • add ignore_loglevel inside quotations

Obtener información de versión

See How to check the OS and firmware versions.

Servidor escolar

Miscelanea

Formatea una memoria USB

MAC:

  1. Insert the USB into your mac
  2. Open Disk Utility (which you can find in the applications/utilities directory)
  3. Click on '967.5 MB USB 2.0...', the usb disk on the left.
  4. Click on the Partition tab
  5. Click on Partition to reformat the USB (this erases everything on the stick)

Comandos de Linux Basicos

(See )

Manufacturando datos

Manufacturing data describes the hardware of a laptop as well as its activation setting. mfg-data

Previo Siguiente

Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Test_Config_Notes/lang-es&oldid=256831"